Locations & Targets

A location is a place you shoot. It holds the range settings and atmosphere; each location contains one or more targets. The active location and target drive the firing solution.

Locations

• Locations (drawer → My Setup) lists your locations; tap to edit.
• A location sets:
  • Max range: how far to calculate.
  • Step: the interval between table rows (DOPE card and friends).
  • Altitude: keep this realistic; it strongly affects the solution.
  • Atmosphere: temperature, pressure and humidity.
  • Latitude: where you are standing, used for the Coriolis effect at long range. Optional, and shared by every target here. Tap the globe to fill it from GPS, or override it for one session from Quick Settings.

Live weather

The atmosphere panel can fetch current conditions:

• ● Live: conditions were just fetched; the footer reads Updated N min ago · Refresh, and tapping it fetches again.
• ◷ Last used: showing the previously fetched values; tap to try fetching live weather again.
• ✎ Manual: you have entered values by hand; a footer link resets to live weather.
• Ammo Temp can follow ambient or be set separately; it feeds the powder-temperature velocity correction when the load has an MV/temperature table (see Loads).

Targets

A target is a specific shot within the location:

• Distance: the range to solve for.
• Slope: up- or down-hill angle of the shot.
• Azimuth: which way you’re firing, used for the Coriolis effect at long range and to turn a compass wind direction into a hold.
• Size: the target’s physical size, used for danger space and hit-probability figures.

Add several targets to a location to describe a full range or stage; the Target Card and Positions widgets show them together, and a saved PRS Stage can sequence them, with build and move time, for the PRS Stage Trainer.

Switching on the fly

The two buttons at the top of Results show the active profile and location; tap either to switch or edit. The whole solution recalculates for your new choice.